Design and implement simcenter system using MQTT protocol based on Google cloud platform
Đồ án tốt nghiệp · Đại học · năm 2020 · đề tài tham khảo
| Loại tài liệu | Đồ án tốt nghiệp |
|---|---|
| Bậc học | Đại học |
| Tác giả | Tran Ngoc Hai; Phan Thi Huyen Thanh; Phan Anh Minh Khanh |
| Người hướng dẫn | Ho, Viet Viet, M.Sc |
| Cơ sở đào tạo | Trường Đại học Bách khoa, Đại học Đà Nẵng |
| Năm | 2020 |
| Nguồn | Thư viện số Trường Đại học Bách khoa, Đại học Đà Nẵng · trang gốc |
Tóm tắt
Early smart home devices often relied on Wi-Fi, Zigbee and Bluetooth to communicate. However, using Wi-Fi drains power so quick, also the stability is not high and even occupies the network bandwidth. With Bluetooth and Zigbee, the control distance of devices is narrowed, causing restrictions for multi-floor houses. Importantly, the use of the HTTP protocol for transmitting and receiving information between devices also has some limitations such as large packet size, long transmission time and unnecessary information lead to poor performance of the system. Design and Implement SimCenter System using MQTT Protocol based on Google Cloud Platform is carried out with the aim to fully understand the concept of Peripheral Interface Controller, deeply comprehended Message Queuing Telemetry Transport Protocol, and its components. Furthermore, this project intends to response the requirement of the market: improve performance, stability of the system and bring low-cost wireless connectivity for smart home devices. With the new protocol, the compact size of MQTT’s packet and its Quality of Service are geared toward reliable Machine-to-Machine communication at a fundamental level, requiring few workarounds to operate smoothly. We aim to a better solution for exchanging data at a faster speed, lighter packets but still full of necessary information. We also show that LoRa, designed by having in mind the typical requirements of Internet of Things (low power consumption, long-range transmission, and robustness to interference), is well-suited to also meet the need of established smart home systems, specifically the low latency in message delivery. Finally, we have completed the project by design and implement the SimCenter System, allows users to directly control smart devices such as Smart switches, TV, Air conditioner, doors, and gates, … in the most convenient and simplest way with a mobile application on smart phone
Bản toàn văn lưu tại thư viện Trường Đại học Bách khoa, Đại học Đà Nẵng
Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.
Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
- Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
- Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
- Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.
Đề tài cùng ngành
- Design simcenter system based on amazon web services cloud platform
- Design network infrastructure for business
- Design and implementation of a server room environment monitoring system
- Design water meter system by using Lora transmission wave
- Design a synchronous pseudo 2-port read/write memory 1024x32mux4 28nm technology
- Research and Develop Smartwatch Display Recognition System
- Design and implementation of statcom for reactive power compensation
- Design A Csi2 Receiver Controller Camera Raspi V2 With Two Data Lanes
Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.