LuanVan.vnLuận Văn
Gửi thư

Design A Csi2 Receiver Controller Camera Raspi V2 With Two Data Lanes

Đồ án tốt nghiệp · Đại học · năm 2020 · đề tài tham khảo

Loại tài liệuĐồ án tốt nghiệp
Bậc họcĐại học
Tác giảNguyen Hong Son; Nguyen Cong Thien
Người hướng dẫnBui, Thi Thanh Thanh, Ph.D
Cơ sở đào tạoTrường Đại học Bách khoa, Đại học Đà Nẵng
Năm2020
NguồnThư viện số Trường Đại học Bách khoa, Đại học Đà Nẵng · trang gốc

Tóm tắt

As a rise of the current market of camera CMOS image sensors, display driver ICs, application processor for mobile devices create a great demand of communication interface which ensure large bandwidth, high speed with low power and the minimum number of the data bus. However, the data flow cannot drive directly between protocol layers. Whilst “common parallel interfaces are difficult to expand, require many interconnections, and consume relatively large amounts of power” .With the vision to establish standards for hardware and software interfaces, MIPI (Mobile Industry Processor Interface) alliance has presented CSI-2 (Camera Serial Interface) which uses D-PHY (physical layer) standard. These standards provide high speed, low power operations with a small number of lanes to connect between camera sensors and a host processor. By the above advantages, they were applied in many applications, especially in mobile and wearable devices. “Design a CSI-2 Receiver Controller” project is carried out to be embedded into a CSI-2 receiver subsystem which is a connector between the PHY layer and the upper layer. In detail, this subsystem can get image data from Raspberry camera via PPI (Physical Protocol Interface), then process and propagate those data to UART for other processing purposes.
Bản toàn văn lưu tại thư viện Trường Đại học Bách khoa, Đại học Đà Nẵng

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.