Design a synchronous pseudo 2-port read/write memory 1024x32mux4 28nm technology
Đồ án tốt nghiệp · Đại học · năm 2020 · đề tài tham khảo
| Loại tài liệu | Đồ án tốt nghiệp |
|---|---|
| Bậc học | Đại học |
| Tác giả | Nguyen Duy Hoang Giang; Pham Tran Quan |
| Người hướng dẫn | Nguyen Van Cuong |
| Cơ sở đào tạo | Trường Đại học Bách khoa, Đại học Đà Nẵng |
| Năm | 2020 |
| Nguồn | Thư viện số Trường Đại học Bách khoa, Đại học Đà Nẵng · trang gốc |
Tóm tắt
Static random-access memory (SRAM) is a critical embedded part of most modern VLSI system-on-chip (SoC). It is a type of semiconductor memory that uses bistable latching circuitry (flip-flop) to store each bit. Static random access memory (SRAM) is the solution often chosen by its fast speed, stability and low power consumption. Data stored on SRAM is only a temporary; it means that data will disappear when the power is turned off. In our thesis - Design synchronous pseudo 2-port Read-Write memory 1024x32 mux4 - our team has built a high performance and low power consumption Pseudo-2-Port SRAM using the technology 28nm process. To meet the criteria of small area, high performance and low power consumption, the 6T bit cell and some design techniques (folding SRAM, pre-decoder and so on) are used. To accomplish this project, our team need to understand the structure SRAM memory both top-view and leaf-cell level. Meanwhile we investigate its operation by draft the true table and data flow. The project Pseudo 2-port (P2P) SRAM memory circuit is implemented in a 28nm process. This circuit operates over the temperature range from –40℃ to 125℃ with supply voltage 0.9V ± 10% and with corners SS, TT, FF.
Bản toàn văn lưu tại thư viện Trường Đại học Bách khoa, Đại học Đà Nẵng
Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.
Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
- Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
- Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
- Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.
Đề tài cùng ngành
- Design network infrastructure for business
- Design A Csi2 Receiver Controller Camera Raspi V2 With Two Data Lanes
- Design and implement simcenter system using MQTT protocol based on Google cloud platform
- Synchronous single-port SRAM 1024x32mux4
- Design simcenter system based on amazon web services cloud platform
- Design and build motorbike parking management system based on license plate recognition
- Design and implementation of a server room environment monitoring system
- Research on SDH/DWDM technology - application in setting up the core transmission network with XDM-1000 ECI
Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.