Research and implement of eCPRI packet processing module for fronthaul network on FPGA in 5G-NR gNodeB base station
Đồ án tốt nghiệp · Đại học · năm 2020 · đề tài tham khảo
| Loại tài liệu | Đồ án tốt nghiệp |
|---|---|
| Bậc học | Đại học |
| Tác giả | Dang Tuan Kiet; Tran Minh Hieu; Nguyen Quang Hung |
| Người hướng dẫn | Nguyen Van Cuong |
| Cơ sở đào tạo | Trường Đại học Bách khoa, Đại học Đà Nẵng |
| Năm | 2020 |
| Nguồn | Thư viện số Trường Đại học Bách khoa, Đại học Đà Nẵng · trang gốc |
Tóm tắt
In the last few decades, Mobile Wireless Communication networks have experienced a remarkable change and generally refer to a change in the nature of system, speed, technology, frequency, data capacity, latency etc. The journey of Mobile Wireless Communication has never stopped evolving from 1G followed by 2G, 3G, 4G, and the latest technology 5G due to the massive demand of human kinds. The duty of upcoming 5G is to ease the pressing of increased bandwidth and range as well as decreased latency and cost. Fronthaul is associated with a new and different type of Radio Access Network architecture consisting of centralized Baseband Units (BBUs) and Remote Radio Units (RRUs)[2] . In order to meet the 5G challenges of increased traffic and data flows, a new connection protocol for the fronthaul network called Evolved Common Public Radio Interface (eCPRI)[1] has been published. As industry bodies consider new network architectures, a key consideration is the functional split that separates layers between the BBUs and the RRUs. However, the more the split options are shifted to the left, the less the amount of data transmitted across the interface which can ease the load for the BBUs. Furthermore, the required data rate at each split options is decreased as it move to the left and as the split options move to the left, the data format is no longer IQ samples. Because of the increase in scale of 5G, a more efficient fronthaul interface is needed. This has led to a paradigm shift in fronthaul network design, targeting greater flexibility and efficiency by moving to a packet – switched network using the mature and widely available Ethernet as the transport base. This thesis is carried out to handle the need in fronthaul transport network by designing a system that supports eCPRI to transmit data from the BBUs to RRUs in 5G Radio Access Network. By referencing the specification of eCPRI, we develop a hardware system on FPGA to encapsulate and extract required headers for this protocol. The system is compatible with a 10G Ethernet subsystem that provides 10Gbps Ethernet MAC and a Physical Interface. On top of the system, we develop drivers and applications to configure and run the system.
Bản toàn văn lưu tại thư viện Trường Đại học Bách khoa, Đại học Đà Nẵng
Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.
Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
- Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
- Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
- Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.
Đề tài cùng ngành
- Research and implementation of Cell Setup procedure in MAC and PHY layers for 5G-NR gNodeB base station
- Parking lot management using automatic license plate recognition yolo-based alpr) implementation on linux system
- Intelligent cold storage management solution
- Designing and implementing a fpga-based layer 2 ethernet switch
- Facial recognition system for access control at application development office in central power information technology company (cpcit)
- Engine monitoring and control system with a cloud-based open-to-everything operating system mindsphere
- The billet feeding tower for Amada LCG 3015 AJ
- Programming and controlling butterfly valve system in Khe Dien Hydroelectric Power plant using PLC S7-1200
Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.