Designing and implementing a fpga-based layer 2 ethernet switch
Đồ án tốt nghiệp · Đại học · năm 2021 · đề tài tham khảo
| Loại tài liệu | Đồ án tốt nghiệp |
|---|---|
| Bậc học | Đại học |
| Tác giả | Nguyễn Đình Vinh; Phan Duy Linh |
| Người hướng dẫn | Huỳnh Việt Thắng; Lương Hà Quế Yên; Bùi Thị Thanh Thanh |
| Cơ sở đào tạo | Trường Đại học Bách khoa, Đại học Đà Nẵng |
| Năm | 2021 |
| Nguồn | Thư viện số Trường Đại học Bách khoa, Đại học Đà Nẵng · trang gốc |
Tóm tắt
This thesis is to analyze our methods, designs, and final results of a design of FPGA-based Layer 2 Ethernet Switch. To implement the design, we inherit and develop a new design of Layer 2 Ethernet Switch IP Core embedded on the Virtex- 6 FPGA ML605 Evaluation Kit, using primarily the Verilog Hardware Description Language, and also design several embedded programs and software applications to configure and evaluate the quality of the design. Specifically, the FPGA-based Ethernet Switch supports a maximum of 8 Ethernet Ports with bandwidth 10/100/1000 Mbps each port, several methods of transmissions such as Broadcast, Unicast, and Multicast (tagged VLAN and Ingress port Mirroring), and the automatic deletion of MAC entries in CAM Table. The measurement and evaluation results show that our Ethernet Switch passes many tests of basic functions, has a high degree of customization, is easily configurable, and has significantly lower latency compared to a particular switch on the market and very low latency in some particular cases. From collecting results, this research has shown an alternative to normal Layer 2 Ethernet Switch and provided some possible abilities to improve and develop other functions on the FPGA-based Ethernet Switches
Bản toàn văn lưu tại thư viện Trường Đại học Bách khoa, Đại học Đà Nẵng
Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.
Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
- Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
- Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
- Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.
Đề tài cùng ngành
- Facial recognition system for access control at application development office in central power information technology company (cpcit)
- Parking lot management using automatic license plate recognition yolo-based alpr) implementation on linux system
- Research and implementation of Cell Setup procedure in MAC and PHY layers for 5G-NR gNodeB base station
- Research and implement of eCPRI packet processing module for fronthaul network on FPGA in 5G-NR gNodeB base station
- Using the openamp framework to monitor linux os on zynq Ultrascale+
- Development of fire detection and warning system based on video processing
- Intelligent cold storage management solution
- FPGA implementation of open-source Central-Processing-Unit (CPU) RISC-V with hardware accelerator modules run on Linux operating system
Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.