Design pseudo 2 – port sram memory – 28nm
Đồ án tốt nghiệp · Đại học · năm 2019 · đề tài tham khảo
| Loại tài liệu | Đồ án tốt nghiệp |
|---|---|
| Bậc học | Đại học |
| Tác giả | Trần Huỳnh Công Bảo; Nguyễn Thị Thùy Nhiên |
| Người hướng dẫn | Nguyễn Văn Cường; Đoàn Ngọc Yến Vui |
| Cơ sở đào tạo | Trường Đại học Bách khoa, Đại học Đà Nẵng |
| Năm | 2019 |
| Nguồn | Thư viện số Trường Đại học Bách khoa, Đại học Đà Nẵng · trang gốc |
Tóm tắt
Static random access memory (SRAM) is a critical embedded part of most modern VLSI system-on-chip (SoC). Static random access memory (SRAM) is the solution often chosen by its large memory capacity and low power consumption. SRAM is a type of semiconductor memory that uses bistable latching circuitry (flip-flop) to store each bit. Data stored on SRAM is only a temporary means that data will disappear when the power is turned off. SRAM is also easier to use than DRAM. "Design Pseudo 2-port SRAM Memory" project is carried out with the aim to capture, better understand integrated circuit technology (ASIC), deeply designed for SRAM memory. Furthermore, this project intends to response the requirement of customer: improve performance, reduce the area, low power consumption, and frequency greater than 500 MHz for SRAM memory. The design consists of four blocks CTL, I/O, DECODE and MEMORY. In this project, our team builds a high performance and low power consumption Pseudo-2-Port (P2P) SRAM using the TSMC 28nm process. To meet the criteria of small area, high performance and low power consumption, P2P SRAM technique, and the 6T bitcell are used. To accomplish this project, our team need to understand the structure and functions of SRAM memory. At the same time, it is possible to analyze the schematic and timing concept. Besides, we need to apply the knowledge learned about SRAM to be able to build and analyze Pseudo 2-port (P2P) SRAM memory. The project Pseudo 2-port (P2P) SRAM memory circuit is implemented in a TSMC 28nm process. This circuit operates over the temperature range from -40oC to 125oC with supply voltage 0.9V ± 10% and with corners SS, TT, FF
Bản toàn văn lưu tại thư viện Trường Đại học Bách khoa, Đại học Đà Nẵng
Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.
Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
- Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
- Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
- Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.
Đề tài cùng ngành
- Human detection by convolutional neural network
- Design a 14nm io impedance calibration block for high speed interface double datarate application
- Automated Irrigation System Using IOT and Raspberry Pi
- Develop and evaluate mac scheduler algorithm in the lte cellular network
- Rfid application in inventory management
- Nâng cao chất lượng và giảm lãng phí tại Công ty TNHH sản xuất Phụ tùng điện ô tô (AEC) Thaco dựa trên Lean Six Sigma
- Research, approach and build prototype of solar harvesting hybrid smartwatch
- Designing dormitory management system for college students
Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.