LuanVan.vnLuận Văn
Gửi thư

Design a 14nm io impedance calibration block for high speed interface double datarate application

Đồ án tốt nghiệp · Đại học · năm 2019 · đề tài tham khảo

Loại tài liệuĐồ án tốt nghiệp
Bậc họcĐại học
Tác giảNguyễn Hoàng Xuân Thu; Thái Hoàng Hưng
Người hướng dẫnHuỳnh Viết Thắng; Lê Bảo Châu
Cơ sở đào tạoTrường Đại học Bách khoa, Đại học Đà Nẵng
Năm2019
NguồnThư viện số Trường Đại học Bách khoa, Đại học Đà Nẵng · trang gốc

Tóm tắt

The main objective of the thesis is to design the IO impedance calibration for high – speed interface that used 14 nm technology. The purpose of the IO impedance calibration is to calibrate the electronic signal, reduce the alter from process, voltage and temperature variations. Two basic types of the IO impedance calibration architecture used are digital block and analog block. The digital block is to generate the RTL code for the analog block, while the analog block will do the calibration process with output driver to drive the signal with the expected current 18mA ± 10% and the comparator to compare the voltage level. This thesis presents an IO impedance calibration block to achieve the expected current, reduce the delay time, increase the speed of transmitting data and apply for double data – rate. The IO impedance calibration block is designed and simulated in Custom Complier of Synopsys using mode 14 nm. This thesis proposes a circuit design for IO impedance calibration block for high speed interface for double data – rate application. We also propose a layout design for the comparator.
Bản toàn văn lưu tại thư viện Trường Đại học Bách khoa, Đại học Đà Nẵng

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.