LuanVan.vnLuận Văn
Gửi thư

Using spectroscopic methods to determine the influence of heterogeneous phases and defects on the thermoelectric properties of Mg-DOPED CuCrO2 material

Luận án · Tiến sĩ · năm 2024 · đề tài tham khảo

Loại tài liệuLuận án
Bậc họcTiến sĩ
Tác giảHoàng Văn Dũng
Người hướng dẫnTrần Cao Vinh; Phan Bách Thắng
Cơ sở đào tạoĐại học Quốc gia TP. Hồ Chí Minh
Năm2024
NguồnThư viện số Đại học Quốc gia TP. Hồ Chí Minh · trang gốc

Tóm tắt

This dissertation has used combined spectroscopic methods to determine the impact of the heterogeneous phase structure and defect on the thermoelectric (TE) properties of Mg-doped CuCrO2 compounds in both bulk and film forms. The TE performance of desired CuCr1 -xMgxO2 (x = 0.0 – 0.3) materials influenced by multiscale defects resulting from a wide range of Mg contents are discussed. Multi-scale defects were studied using a combination of spectroscopic techniques, including photoluminescence (PL), Fourier-transform infrared (FT-IR), Raman, X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) measurements. Additionally, morphological analyses were conducted using Field Emission Scanning Electron Microscopy (FESEM) and Transmission Electron Microscopy (TEM), while electrical properties were examined via Hall effect measurements, and TE properties were assessed through Seebeck and thermal conductivity measurements. In the low region of Mg content (x < 0.15), point defects, such as interstitial oxygen, copper vacancies, or Mg2+ substitution at Cr3+ sites, critically influence the TE performance of the material. However, in the high region of Mg content (x ≥ 0.15), the presence ofnew phases, such as MgCr2O4, CuO, or Cu2O contributes to a heterogeneous phase structure that causes a dramatic effect on the TE performance of the desired CuCr1 - xMgxO2 materials, particularly the reduction in thermal conductivity. In addition to the effects of dopants or synthetic conditions (sintering temperature) on TE performance, defect engineering and structural engineering can be combined to enhance performance by controlling the dimensions of the material, from bulk to film forms. The addition of Mg resulted in the formation of new phases, preventing the stoichiometric CuCr1 -xMgxO2 composition from being achieved throughout the entire sample. Therefore, to avoid any confusion regarding stoichiometry, the sample is named as CCMxO (where x = 0.0–0.3, representing the molar ratio of Mg in the desired CuCr1 -xMgxO2 compounds).
Bản toàn văn lưu tại thư viện Đại học Quốc gia TP. Hồ Chí Minh

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.

Tải ứng dụng AI Học Thuật

Tư vấn học thuật, luận văn, công bố quốc tế với chuyên gia — miễn phí trên iPhone, iPad và Android.

Download on the App Store Tải trên Google Play