LuanVan.vnLuận Văn
Gửi thư

Test-chip system for 28nm Pseudo-Ram

Đồ án tốt nghiệp · Đại học · năm 2019 · đề tài tham khảo

Loại tài liệuĐồ án tốt nghiệp
Bậc họcĐại học
Tác giảLê Minh Trí; Nguyễn Đình Trí
Người hướng dẫnNguyễn Văn Cường; Nguyễn Nhật Tuấn
Cơ sở đào tạoTrường Đại học Bách khoa, Đại học Đà Nẵng
Năm2019
NguồnThư viện số Trường Đại học Bách khoa, Đại học Đà Nẵng · trang gốc

Tóm tắt

Today, the microchip industry is of prime importance, both in scale and the combination of scientific knowledge. Digital and analog IC design is a strong development direction in the world and in Vietnam. The application in a wide range of civilian to military sectors such as phones, computers, automated systems, industrial chains, airplanes, vehicles, etc. has spurred the circuit design to a new level. A series of companies invest in a team of professional chip designers, optimizing in terms of time, capacity, area and cost. As more and more chips are produced, the need to test the features and operation of the chip after production is increasing. Investment in IC design has been more difficult and expensive than the rest of the industry, investment in microchip testing after re-design has faced many obstacles. Large-scale companies can build their own chip testing systems, but for small and medium-sized companies, large system to test chip features is indeed a challenge.The purpose of the project is to build an automated chip testing process that can be applied on a variety of chips. Test chip processes can be automated, users can easily check the chip's features with the given cases. The project aims to optimize, minimize the cost of a chip test system by using hardware design on FPGAs and computer software.
Bản toàn văn lưu tại thư viện Trường Đại học Bách khoa, Đại học Đà Nẵng

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.