LuanVan.vnLuận Văn
Gửi thư

Studying on nonlinear vibration isolation model using pneumatic artificial muscle

Luận án · Tiến sĩ · năm 2025 · đề tài tham khảo

Loại tài liệuLuận án
Bậc họcTiến sĩ
Tác giảTrinh Van Chon
Người hướng dẫnLe Thanh Danh; Luu Thanh Tung
Cơ sở đào tạoĐại học Quốc gia TP. Hồ Chí Minh
Năm2025
NguồnThư viện số Đại học Quốc gia TP. Hồ Chí Minh · trang gốc

Tóm tắt

This study develops an innovative vibration isolation model based on the conceptual design of a cam mechanism named IVBM. Indeed, the configuration of this isolation model includes two mechanisms: one is the offset slider-crank mechanism with positive stiffness used to support the load, while the second is the cam mechanism with negative stiffness employed to correct the dynamic stiffness of the developed model, aiming to obtain a constant force-displacement or quasi-zero stiffness curve in the working region and reduce the negative effects of the bending of the vibration transmission curve on the isolation effectiveness. Additionally, a novel point of this developed model is to employ the pneumatic artificial muscle (PAM) as an elastic element to replace traditional elastic elements such as mechanical coil springs, rubber air springs, magnetic springs, and so on. Because the force and stiffness of pneumatic artificial muscles can be easily adjusted and controlled, this model can flexibly convert from passive to active mode and vice versa without the addition of an actuator.
Bản toàn văn lưu tại thư viện Đại học Quốc gia TP. Hồ Chí Minh

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.