LuanVan.vnLuận Văn
Gửi thư

Structure and Properties of Electrospun Polymer Fibers and Applications in Biomedical Engineering

Luận án · Tiến sĩ · năm 2005 · đề tài tham khảo

Loại tài liệuLuận án
Bậc họcTiến sĩ
Tác giảCheryl L Casper
Cơ sở đào tạoĐại học Quốc gia TP. Hồ Chí Minh
Năm2005
NguồnThư viện số Đại học Quốc gia TP. Hồ Chí Minh · trang gốc

Tóm tắt

Increased interest in nanotechnology has revived a fiber processing technique invented back in the 1930’s. Electrospinning produces nanometer to micron size fibers that are not otherwise achievable using conventional fiber spinning methods. Due to small fiber diameters, high surface area, tailorable surface morphology, and the creation of an interconnected fibrous network, electrospun fibers have found use in a variety of applications. However, a multitude of parameters directly affect the electrospinning process thus requiring a fundamental understanding of how various parameters affect the process and resulting fiber properties. Accordingly, the focus of this dissertation is to provide insight on how solution characteristics and processing parameters directly affect the electrospinning process, and then apply this knowledge to create electrospun membranes for biomedical applications. Solution characteristics (polymer/solvent, molecular weight, concentration, viscosity) were found to directly affect the electrospinning process. The effect of molecular weight, concentration, and viscosity was examined and it was determined that the intrinsic viscosity ([rj]), which is a function of molecular weight, and solution concentration (C) directly affect the fiber formation process. If [il]C< 10, beads are formed instead of continuous fibers. This study illustrated the critical role that chain entanglements and other intermolecular interactions play in the fiber formation process. Another fundamental study was carried out to investigate the effect of relative humidity on the surface morphology of electrospun fibers. It was found that electrospinning in an atmosphere of 30% or more relative humidity creates porous features on the surface of polystyrene fibers. Pores were approximately 85 nm in diameter and increased to 135 nm with increasing humidity. Not only do pore diameters change with increasing humidity, but pore size distributions, shape, and pore depths are also affected by humidity levels. AFM studies revealed that pore depths increase from 48 nm to 220 nm as the relative humidity during electrospinning increased. The effect of humidity on surface morphology is mainly attributed to evaporative condensation. The increases in pore diameter as a function of increasing molecular weight is believed to result from reduced polymer diffusion times since the diffusion coefficient is inversely proportional to the square of the polymer molecular weight. These fundamental studies provided insight on how to control the electrospinning process; this knowledge was then utilized to electrospin fibrous membranes for biomedical applications. One aspect of this work focused on incorporating low molecular weight heparin (LMWH) into electrospun fibers. Heparin is known for its ability to bind growth factors and thus it plays an integral role in drug delivery and tissue engineering applications. The goal of this work was to fabricate functionalized electrospun fibers to produce a biologically active matrix that would allow for the binding and delivery of growth factors for possible drug delivery applications. A four-arm star poly(ethylene glycol) (PEG) with covalently attached LMWH was investigated for its ability to be incorporated into electrospun fibers and to monitor its effect on growth factor binding/release when compared to LMWH alone. It was found that both PEG-LMWH and LMWH could be incorporated into fiber form, upon mixing with poly(ethylene oxide) or poly(lactide-co-glycolide) prior to electrospinning, at concentrations ranging from 3.5-9.5 µg per milligram of electrospun fibers. Although LMWH and PEG-LMWH matrices were found to contain similar amounts of heparin, PEG-LMWH matrices showed increased growth factor binding and retention of heparin over a 14 day period. LMWH matrices showed significant loss of heparin after only 1 day of incubation. PEG-LMWH is believed to diffuse more slowly out of the membranes than LMWH alone thus allowing
Bản toàn văn lưu tại thư viện Đại học Quốc gia TP. Hồ Chí Minh

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.