LuanVan.vnLuận Văn
Gửi thư

Research and Development of a Multi-functional Automation System for Oocyte Maturation

Luận văn · Thạc sĩ · năm 2025 · đề tài tham khảo

Loại tài liệuLuận văn
Bậc họcThạc sĩ
NgànhKỹ thuật, xây dựng, môi trường
Tác giảDang Van Hieu
Người hướng dẫnVu Quoc Tuan
Cơ sở đào tạoĐại học Quốc gia Hà Nội
Năm2025
NguồnThư viện số Đại học Quốc gia Hà Nội · trang gốc

Tóm tắt

This thesis presents the development and validation of an automated incubation system for the in vitro maturation (IVM) of oocytes. The system is designed with precise environmental control capabilities using a PID controller to maintain stable temperature and CO2 concentration. Long-term experiments showed that the temperature was maintained with a deviation of less than 0.2◦C, while the CO2 concentration was regulated with a mean absolute error of less than 500 ppm. In addition to environmental control, the system integrates a real-time imaging module that enables automated monitoring of oocyte development. Oocyte maturation experiments were conducted under both oil-covered and non-oil-covered conditions over a 48-hour period. A total of 387 porcine oocytes were cultured across 12 batches, resulting in an average maturation rate of 80.8%. Maturation status was assessed by identifying the polar body and using DAPI nuclear staining. The monitoring system captured time-lapse images of 12 oocytes over a 6-hour period, with 28 image sequences obtained for each sample. Morphological analysis showed a gradual increase in oocyte area, reflecting cytoplasmic and nuclear changes associated with the maturation process. The results demonstrate that the system is capable of maintaining a stable culture environment while simultaneously supporting automated, real-time monitoring of oocyte maturation, thereby contributing to the feasibility of automated IVM platforms.
Bản toàn văn lưu tại thư viện Đại học Quốc gia Hà Nội

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Hướng dẫn chọn đề tài, cấu trúc và số liệu cho ngành này: Luận văn kỹ thuật, xây dựng, môi trường · Hỏi đáp từng chương với người hướng dẫn số: Học Giả Số · Công cụ số: Luận Văn Số.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.