Processing of UHMWPE and HA/UHMWPE nanocomposite for biomedical applications
Luận án · Tiến sĩ · năm 2006 · đề tài tham khảo
| Loại tài liệu | Luận án |
|---|---|
| Bậc học | Tiến sĩ |
| Tác giả | Liming Fang |
| Cơ sở đào tạo | Đại học Quốc gia TP. Hồ Chí Minh |
| Năm | 2006 |
| Nguồn | Thư viện số Đại học Quốc gia TP. Hồ Chí Minh · trang gốc |
Tóm tắt
Ultrahigh molecular weight polyethylene (UHMWPE) is an implant material for orthopedic implants because of its excellent mechanical properties. However, its applications were limited by the poor processability, particularly its use as matrix materials for bone-analogue. The objective of this work is to process UHMWPE and hydroxyapatite/UHMWPE (HA/UHMWPE) nanocomposites for biomedical applications. UHMWPE was processed by extrusion in a temperature window, in which a metastable polyethylene phase transformation was induced by the elongational flow. Compared with conventional methods, the flow resistance was reduced by the mobile mesophase and the fusion of powder became faster by the improved inter-particle chain diffusion. Pin-on-disc wear tests showed that the as-extruded UHMWPE exhibited less wear loss, smaller wear debris and smoother worn surface, suggesting it has higher wear resistance than conventional sample. HA/UHMWPE nanocomposite was processed by twin-screw extrusion of HA and UHMWPE powder mixture and swelling UHMWPE in a solvent to control the shear viscosity. Microstructure showed that aggregated HA powder was broken down to nano-sized primary particles and dispersed homogeneously by the intensive shear mixing in the extruder. The HA particles and UHMWPE fibrils were intimately contacted because swelling improved the chain mobility of UHMWPE. The composite stiffness was significantly enhanced attributed to the reinforcement effect of HA nano particles to UHMWPE fibrils. Since the toughness of UHMWPE was maintained in the composite, the composite was hot drawn to further increase the strength to that of cortical bone by aligning UHMWPE fibrils along the drawing direction. Biological evaluation indicated that the composite was biocompatible and very bioactive in simulated body fluid immersion. It was shown that the composite with 30% of HA by volume had optimal mechanical and biological properties.
Bản toàn văn lưu tại thư viện Đại học Quốc gia TP. Hồ Chí Minh
Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.
Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
- Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
- Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
- Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.
Đề tài cùng ngành
- Nghiên cứu hoạt tính sinh học của loài Địa tiễn Marchantia polymorpha L. thu hái ngoài tự nhiên và sinh khối in vitro
- Đặc điểm xoáy thuận nhiệt đới (áp thấp nhiệt đới và bão) hoạt động trên biển đông
- Protecting trademark by using trademark coexistence agreement
- Tổng hợp chất lỏng ion khung pyrrolidin gắn trên silica gel ứng dụng làm xúc tác trong tổng hợp quinazolin-4(3H)-on và làm pha tĩnh chiết pha rắn trong phân tích quinolon
- Tối ưu hóa mô hình YOLO v3-tiny sử dụng DPU trên FPGA
- Nghiên cứu phép phân tích huỳnh quang tia X trên hệ phổ kế HPGe với nguồn kích thích 238Pu/241Am
- Nghiên cứu xác lập quy trình nuôi cấy tế bào sừng người trên màng Collagen từ màng ối hướng tới ứng dụng ghép tự thân điều trị các tổn thương mất da
- Định lý ERDOS - KO - RADO và một số vấn đề liên quan
Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.