LuanVan.vnLuận Văn
Gửi thư

Modeling of FRP-Jacketed RC Columns Subject to Combined Axial and Lateral Loads

Luận án · Tiến sĩ · năm 2006 · đề tài tham khảo

Loại tài liệuLuận án
Bậc họcTiến sĩ
Tác giảChung-Sheng Lee
Cơ sở đào tạoĐại học Quốc gia TP. Hồ Chí Minh
Năm2006
NguồnThư viện số Đại học Quốc gia TP. Hồ Chí Minh · trang gốc

Tóm tắt

To successfully use the fiber-reinforced-polymer (FRP) overlay technique for the seismic retrofit and the blast-hardening of RC columns, the mechanical behavior of the FRP-confined concrete needs to be understood and its response needs to be accurately predicted. Although a number of studies have been conducted to-date, it is still not clear how the main parameters affect the axial stress-strain response of a FRP-confined concrete cylinder. In particular, while it is understood that FRP jackets inhibit dilatancy, current models do not capture the physics that leads to ascending or strain-softening responses vs. the level of lateral confinement. In this dissertation, a dilatancy-based analytical model for FRP-jacketed circular concrete cylinders in axial compression was developed. The proposed theory is applicable to both the heavily confined case with ascending axial loaded vs. axial strain response, and the lightly confined specimen with strain-softening behavior. As an extension of the circular model, a new model for rectangular FRP-confined sections was then developed. In addition to jacket membrane strain, the jacket flexural strains caused by the cross-sectional shape were taken into account, and the rupture strain of the FRP jacket in the corner zone was predicted. The present model was validated via a large set of existing test results, and excellent agreement with experimental data was observed. As the application of the proposed concrete model, a load-displacement model and an associated computational algorithm were developed and validated for the response and failure conditions of RC columns subject to combined axial and seismic-type (lateral) loads. On the other hand, excluding the strain rate effects on material parameters from modeling, an analytical procedure was also developed to predict the resistance function of FRP-jacketed RC columns subject to combined axial and uniform lateral (simulated blast) loads. The model was validated via the results of the UCSD quasi-static tests on “blast columns”, and satisfactory correlation with the experimental load-displacement curves were observed. The present models and the analytical procedures proposed in this dissertation can serve as design/analysis tools for the FRP overlay technique as applied to the seismic retrofit as well as the blast-hardening of RC columns.
Bản toàn văn lưu tại thư viện Đại học Quốc gia TP. Hồ Chí Minh

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.