Mechanical devices for manually prestressing FRP and their applications in structural strengthening
Luận án · Tiến sĩ · năm 2006 · đề tài tham khảo
| Loại tài liệu | Luận án |
|---|---|
| Bậc học | Tiến sĩ |
| Tác giả | Piyong Yu |
| Cơ sở đào tạo | Đại học Quốc gia TP. Hồ Chí Minh |
| Năm | 2006 |
| Nguồn | Thư viện số Đại học Quốc gia TP. Hồ Chí Minh · trang gốc |
Tóm tắt
Fiber reinforced polymer (FRP) systems have demonstrated to be effective for the retrofitting of masonry walls and reinforced concrete (RC) members. Prestressing of the FRP can further improve the serviceability and capacity of the strengthened elements. This dissertation presents the development of one mechanical device to prestress glass FRP (GFRP) bars and another device to prestress carbon FRP (CFRP) sheets and their applications for the retrofit of unreinforced masonry (URM) walls and RC beams. For the GFRP bar system, the bars are installed in grooves of the URM walls with near surface mounted (NSM) technique and then post-tensioned with the hand-held device to partially close cracks and increase shear capacity of the walls. For the CFRP sheet system, the sheets are temporarily anchored to the device, and prestressing is achieved by applying an equal vertical uplift displacement at an equal distance away from the anchorage regions. For both devices, prestressing forces are applied manually without the need for hydraulic jacks. The URM walls were then tested under one in-plane diagonal compressive load, and the RC beams were tested under one four-point bending system. Increase of the shear capacity of the strengthened walls and the flexural capacity of the strengthened beams was observed. A theoretical analysis of the shear capacity of the tested URM walls was conducted. A theoretical model for calculating prestressing stresses of the CFRP sheet and the allowable prestressing level before the CFRP system fails was proposed. Flexural and premature failure of the RC beams strengthened with the prestressed CFRP sheets was investigated as well. The theoretical investigations and the experimental programs of the walls and the beams are presented in this dissertation.
Bản toàn văn lưu tại thư viện Đại học Quốc gia TP. Hồ Chí Minh
Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.
Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
- Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
- Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
- Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.
Đề tài cùng ngành
- Tác động của lãnh đạo trao quyền và tính minh bạch tổ chức đến hiệu suất công việc và hành vi đổi mới: vai trò trung gian của khả năng chủ động trong lãnh đạo phân tán
- THE PROCEDURE OF AUDITING FIXED ASSETS AT MAZARS VIETNAM
- Combinatorial algorithms for inverse optimization problems
- Reliable recognition of handwritten digits using a cascade ensemble classifier system and hybrid features
- Khảo sát hóa học hạt Thảo Quyết Minh, Cassia Tora L, họ Vang (Caesalpiniaceae)
- Nuôi cấy dịch treo tế bào cây dầu mè (Jatropha curcas L.) cho mục đích phát sinh hình thái
- Nghiên cứu điều kiện chế tạo, tính năng của pin mặt trời chất màu nhạy quang (DSC) và động học các quá trình hóa lý xảy ra trong pin
- Thu thập Acetobacter từ khu vực trồng lúa và sàng lọc các chủng có đặc tính kích thích tăng trưởng thực vật
Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.