LuanVan.vnLuận Văn
Gửi thư

Low voltage, MEMS-based reflective and refractive optical scanners for endoscopic biomedical imaging

Luận án · Tiến sĩ · năm 2006 · đề tài tham khảo

Loại tài liệuLuận án
Bậc họcTiến sĩ
Tác giảAnkur Jain
Cơ sở đào tạoĐại học Quốc gia TP. Hồ Chí Minh
Năm2006
NguồnThư viện số Đại học Quốc gia TP. Hồ Chí Minh · trang gốc

Tóm tắt

Imaging technologies such as optical coherence tomography (OCT), two-photon excitation fluorescence microscopy (TPEF), and second harmonic generation (SHG) microscopy require optical scanners to transversely scan a focused laser beam onto the tissue specimen being imaged. However, for in vivo early-cancer detection of internal organs the optical scanners must be integrated into slender endoscopes. The goal of this work is to develop millimeter-sized MEMS optical scanners packaged inside endoscopes to enable endoscopic biomedical imaging. This work reports MEMS micromirrors and microlens scanners fabricated using post-CMOS micromachining processes, which can provide large scan ranges at low driving voltages. Several 1-D and 2-D micromirror scanners have been designed, fabricated and characterized. Scanning micromirrors, as large as 1.3 by 1.1 mm2, have demonstrated optical scan angles greater than 40° at actuation voltages below 20Vdc. The maximum scanning speed of these devices is in the range of 200 to 500Hz, which is adequate for real-time bio-imaging. A new electrothermal microactuator design is reported which enables large vertical displacements (LVD). This LVD microactuator uses two sets of electrothermal bimorph thin-film beams to provide out-of-plane elevation to the micromirror, while keeping the mirror parallel to the substrate. LVD micromirrors have demonstrated large bi-directional scanning ability (>±40°) as well as large vertical piston motion (-0.5mm) at low driving voltages (
Bản toàn văn lưu tại thư viện Đại học Quốc gia TP. Hồ Chí Minh

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.

Tải ứng dụng AI Học Thuật

Tư vấn học thuật, luận văn, công bố quốc tế với chuyên gia — miễn phí trên iPhone, iPad và Android.

Download on the App Store Tải trên Google Play