LuanVan.vnLuận Văn
Gửi thư

Instrumental intensity scales for geotechnical and structural damage

Luận án · Tiến sĩ · năm 2006 · đề tài tham khảo

Loại tài liệuLuận án
Bậc họcTiến sĩ
Tác giảSarah Beth Upsall
Cơ sở đào tạoĐại học Quốc gia TP. Hồ Chí Minh
Năm2006
NguồnThư viện số Đại học Quốc gia TP. Hồ Chí Minh · trang gốc

Tóm tắt

The purpose of an earthquake intensity scale is to express the severity of ground shaking at different locations. Intensity values can be used to compare one area with another for a given earthquake, as well as to compare shaking in the same area in different earthquakes. Intensity measures are useful for providing a historical record of the effects of an earthquake; for seeing an aerial distribution of ground shaking which can be correlated to the geology of the site; in understanding historical earthquakes in areas with no instruments; for rapid response purposes; and to correlate observed "damage" to ground shaking. Earthquake damage may consist of structural damage due to ground shaking (e.g. buildings, bridges, etc.) and/or damage due to ground movement (e.g. liquefaction, landslides, etc.). New instrumental intensity scales that correlate well with structural and geotechnical damage have been developed. Five primary damage mechanisms were identified as important potential contributors to earthquake damage in a typical urban environment: structures, slope instability, lateral spreading, post-liquefaction settlement, and damage to lifelines. Damage states for each mechanism were identified to create comparable measures of damage and to combine damage potential for the individual mechanisms into a single instrumental intensity scale. Physical damage to each of these mechanisms was related to performance levels of appropriate response parameters. Ground motion parameters that were strongly correlated to different damage states for a wide variety of earthquakes were identified. These parameters were used to develop a set of structural and geotechnical instrumental intensity scales capable of estimating damage potential based on recorded ground motions. The instrumental intensity scales were used to estimate the spatial distribution of damage potential to areas affected by the Loma Prieta and Northridge earthquakes using a GIS framework. For selected pairs of records, intensity values computed from the structural and geotechnical instrumental intensity scales were compared with intensity values computed from the instrumental intensity scale of Wald et. al, which is currently used to create real-time ShakeMaps. It was shown that the intensity values computed by the scales developed in this research provide a better indication of damage potential than the latter.
Bản toàn văn lưu tại thư viện Đại học Quốc gia TP. Hồ Chí Minh

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.