LuanVan.vnLuận Văn
Gửi thư

Fault diagnosis of induction motors using signal processing based methods and optimal feature selection

Luận án · Tiến sĩ · năm 2008 · đề tài tham khảo

Loại tài liệuLuận án
Bậc họcTiến sĩ
Tác giảNguyen Ngoc Tu
Cơ sở đào tạoĐại học Quốc gia TP. Hồ Chí Minh
Năm2008
NguồnThư viện số Đại học Quốc gia TP. Hồ Chí Minh · trang gốc

Tóm tắt

Fault detection and diagnosis in rotating machines have been used widely in commercial systems over the past few decades. Numerous works on machine conditions have been implemented with the aid of the MCSA (Motor Current Signature Analysis) method, the vibration-based methods, etc. The purpose of these methods is to detect and diagnose faults in an early stage and therefore allow contingency plans to be put into place before the problems worsen. The dynamic and vibratory behaviours of the machine, such as vibration, sound, and temperature… are affected if the running condition is changed. The behaviours can be useful indicators to detect problems within the machine as they vary abnormally from a standard when a fault occurs. Of the many signals which can be measured, the vibration signal has been the most useful to monitor the machine condition as in many cases the time domain vibration signals are sufficient to diagnose and can be easily measured with accelerometers. The signal processing methods for induction motor fault detection have recently received great attention because they do not need a typical mathematical model. Many signal processing diagnostic procedures have been studied in this work to identify faults of the machines. The decision tree, support vector machine (SVM), artificial neural network (ANN), adaptive neurofuzzy inference system (ANFIS), and k-nearest neighbour (K-NN) have been applied to diagnose the condition of machines with rather high accuracy. These methods have used vibration data as an indicator for monitoring the fault conditions. In this work, the vibration data are measured in three dimensions to collect as much information as possible. Then an optimal feature selection is proposed in this work for improving the classification performance of the diagnostics system. The classification results have proved the efficiency of the proposed optimal feature selection and the suitability of vibration data as an indicator for induction motor fault diagnosis.
Bản toàn văn lưu tại thư viện Đại học Quốc gia TP. Hồ Chí Minh

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.