LuanVan.vnLuận Văn
Gửi thư

Electro-osmotic grouting technique for liquefaction-mitigation of low permeability silty soils

Luận án · Tiến sĩ · năm 2006 · đề tài tham khảo

Loại tài liệuLuận án
Bậc họcTiến sĩ
Tác giảWeiwei Jia
Cơ sở đào tạoĐại học Quốc gia TP. Hồ Chí Minh
Năm2006
NguồnThư viện số Đại học Quốc gia TP. Hồ Chí Minh · trang gốc

Tóm tắt

Electro-osmotic grouting is a new foundation improvement technique proposed to treat low permeability, liquefiable silty soils underneath existing structures for the purpose of liquefaction-mitigation. This technique uses a d.c. current to introduce water soluble grout materials and reactants into the silty soils. Setting time of injected grouts can be controlled by adjusting the concentration and sequence of introduction of various components. Both experimental and numerical studies were performed in this research. Experiments were conducted to prove the feasibility of electro-osmotic injection under 1-D and 3-D conditions, to quantify the increase of liquefaction resistance in silty soils due to electro-osmotic grouting, and to design grout mixes feasible for electro-osmotic grouting. Numerical analyses were performed to simulate grout flows under a 3-D condition, to determine the rate and extent of grout penetration, and to estimate power consumption in electro-osmotic grouting. Study shows that electro-osmotic grouting is a promising technique. Colloidal silica and sodium silicate grouts can be injected into low permeability sility soils at the rate of about 10-5 cm/s per v/cm, and liquefaction resistance of the silty soils increased signicantly after injection.
Bản toàn văn lưu tại thư viện Đại học Quốc gia TP. Hồ Chí Minh

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.