LuanVan.vnLuận Văn
Gửi thư

Electro-location, tomography and porosity measurements in geotechnical centrifuge models based on electrical resistivity concepts

Luận án · Tiến sĩ · năm 2006 · đề tài tham khảo

Loại tài liệuLuận án
Bậc họcTiến sĩ
Tác giảZhihua Li
Cơ sở đào tạoĐại học Quốc gia TP. Hồ Chí Minh
Năm2006
NguồnThư viện số Đại học Quốc gia TP. Hồ Chí Minh · trang gốc

Tóm tắt

This research was focused on the development of electrical techniques for soil characterization and soil dynamic behavior assessment. The research carried out mainly includes (1) development of a needle probe tool for assessment of soil spatial variability in terms of porosity with high-resolution in the centrifuge testing; (2) development of an electro-location technique to accurately locate buried objects' movements inside the soil during dynamic events, e.g. earthquakes; (3) collaborative development of a new electrode switching system (ESS) to implement electrical resistivity tomography (ERT), and electro-location with high speed and high resolution. To assess the soil spatial variability with high-resolution, an electrical needle probe tool was developed to be deployed during centrifuge model testing to measure soil electrical resistivity. After normalizing the soil resistivity by the pore fluid resistivity, this information can be correlated to the porosity of the soil. Different needle probe tip shapes including single-wedge, double-wedge and cone were developed to optimize the spatial resolution of porosity, soil interfaces and layering. Calibration of the needle probes in laboratory prepared soils were conducted, results of resistance versus depth and porosity versus depth were illustrated. Loosening due to insertion of the needle probe was evaluated. A special needle probe tool, along with data acquisition and data processing tools were developed to be operated by the new NEES robot on the centrifuge. The needle probes have great potential to resolve interfaces between soil layers and small local variations in void ratio with a spatial resolution approximately equal to the spacing between the electrodes (about half of the probe diameter). A new electrode switching system (ESS), useful for electrical resistivity tomography, was used to accurately detect the movement of buried objects using a new electro-location scheme. The idea was to establish an electromagnetic field in a centrifuge model by injecting low-frequency alternating currents through pairs of electrodes applied to a neoprene insulating sheet at the interface between the soil and the model container. The locations of the buried objects are related to the potentials measured on the buried object. A closed form approximate expression for the electric field in a rectangular specimen with insulated boundaries was obtained based on the method of images. The resolution of spatial location using the proposed scheme for electro-location is a function of the electrical noise environment, and the accuracy of measurement of the voltage at the buried object. The accuracy depends on the number of samples per measurement, measurements per cycle of excitation, frequency of excitation, and position of measurement relative to the current injections points. The tradeoff between spatial and temporal resolution was investigated. The system was demonstrated to work well (- 1 mm resolution). The container-neoprene-medium system was determined to act as a low-pass filter. The application of the electro-location method in detection of liquefaction-induced settlements of heavy objects in the centrifuge test was performed, and the obtained positions agreed remarkably with the independent measurements. The electro location method is considered to be a potentially useful tool for measurement of movement of buried objects in the physical models in the centrifuge and it potentially may be useful for field applications.
Bản toàn văn lưu tại thư viện Đại học Quốc gia TP. Hồ Chí Minh

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.