Development of Load and Resistance Factor Design for FRP Strengthening of Reinforced Concrete Structures
Luận án · Tiến sĩ · năm 2006 · đề tài tham khảo
| Loại tài liệu | Luận án |
|---|---|
| Bậc học | Tiến sĩ |
| Ngành | Kỹ thuật, xây dựng, môi trường |
| Tác giả | Rebecca Anne Atadero |
| Cơ sở đào tạo | Đại học Quốc gia TP. Hồ Chí Minh |
| Năm | 2006 |
| Nguồn | Thư viện số Đại học Quốc gia TP. Hồ Chí Minh · trang gốc |
Tóm tắt
Externally bonded fiber reinforced polymer (FRP) composites are an increasingly adopted technology for the renewal of existing concrete structures. In order to encourage the further use of these materials, a design code is needed that considers the inherent material variability of the composite, as well as the variations introduced during field manufacture and environmental exposure while in service. Load and Resistance Factor Design (LRFD) is a reliability-based design methodology that provides an ideal framework for these considerations and is compatible with existing trends in civil engineering design codes. This dissertation studies the application of LRFD to FRP strengthening schemes with an emphasis on wet layup, carbon fiber composites applied to reinforced concrete T-beam bridge girders. Models to describe variation in the existing structural materials and the structural loading are drawn from the literature. Techniques for reliability analysis are discussed, and existing work on externally bonded FRP reliability is surveyed. Stochastic variation in the FRP is characterized based on tensile testing of several sets of field-manufactured, wet layup composites. A general design procedure applicable to many different situations is proposed using a composite specific resistance factor to consider material variability, a set of Application Factors to account for deviations introduced through field manufacture, and an environment and service-life specific factor for FRP degradation. Preliminary resistance factors for design of FRP strengthening are calibrated over a range of design scenarios. FRP degradation is considered based on existing durability models, and continued degradation of the structure due to general corrosion of the reinforcing steel is included. The girders used for calibration are selected as representative examples from a sample of California bridge plans. The reliability has been evaluated using simulation and first-order reliability methods. An example of the proposed design procedure, using the calibrated resistance factors, is provided. The results of this work bring to light the many variables affecting the reliability of strengthened members and the need for continuing research to better describe these variables. Two variables of particular significance, requiring extensive further study, are the state of the existing structure when strengthening is applied and the loads acting on the structure.
Bản toàn văn lưu tại thư viện Đại học Quốc gia TP. Hồ Chí Minh
Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.
Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
- Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
- Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
- Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.
Hướng dẫn chọn đề tài, cấu trúc và số liệu cho ngành này: Luận văn kỹ thuật, xây dựng, môi trường · Hỏi đáp từng chương với người hướng dẫn số: Học Giả Số · Công cụ số: Luận Văn Số.
Đề tài cùng ngành
- Chế tạo vật liệu điện cực từ nguồn sinh khối ứng dụng trong công nghệ khử ion điện dung (CDI)
- Đánh giá hiện trạng BPA và phthatates trong môi trường nước khu vực tiếp nhận nước thải từ các KCN - KCX
- Đánh giá giá trị dịch vụ môi trường rừng phục vụ công tác quản lý nghiên cứu tại Đức Trọng - Lâm Đồng
- Nghiên cứu và chế tạo hệ thống màng ZnO, TiO2 tạo bề mặt diệt khuẩn và chống đọng nước
- Xác định môi trường thích hợp nuôi trồng nấm tre (Dictyophora indusiata)
- Transport polymerization for materials synthesis
- Khôi phục Video bị nhiễu Poisson
- Thiết kế, mô phỏng và bước đầu chế tạo thử nghiệm cảm biến gia tốc kiểu tụ hình chữ thập theo công nghệ MEMS
Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.