Development of flexible protective system for press-brakes using vision
Luận án · Tiến sĩ · năm 2009 · đề tài tham khảo
| Loại tài liệu | Luận án |
|---|---|
| Bậc học | Tiến sĩ |
| Ngành | Kỹ thuật, xây dựng, môi trường |
| Tác giả | Trần Nguyên Duy Phương |
| Cơ sở đào tạo | Đại học Quốc gia TP. Hồ Chí Minh |
| Năm | 2009 |
| Nguồn | Thư viện số Đại học Quốc gia TP. Hồ Chí Minh · trang gốc |
Tóm tắt
Press-brakes are used in most manufacturing workshops for bending, forming, straightening, punching and trimming. Unfortunately, these versatile machines cause many accidents to workers, who in many cases, must hold the work piece too close to the dies, or must put their hands within the dangerous zones in order to keep up with the rate of production. It is known that the movement of the ram in hydraulic press-brakes can be stopped instantaneously at any time during the process. For this reason, only a protective system for hydraulic press-brakes is recommended. It has also been observed that most existing systems have a fixed interdiction volume, provoking stoppage of the press-brake whenever the hands of the worker enter this area. These protective systems cannot distinguish motions which are directed towards entering the cutting zone from motions aiming at the exterior of this dangerous zone. They are therefore too restrictive to meet production needs. In order to improve the flexibility of the protective system, it is necessary to develop a new one. This thesis presents the development of a flexible protective system, taking the motion of the worker’s hands into account. The proposed innovative solution consists of generating a flexible interdiction zone, whose dimensions and shape depend on the instantaneous velocity of the inspected point, the machine stopping time, and the calculation time of the processing loop. The instantaneous motion of an inspected point on the worker’s hand is tracked using camera sets distributing on the different views. The machine is stopped whenever the inspected point interferes with the flexible interdiction zone. The interference between the inspected point and the flexible interdiction zone is verified using the spatial traversability vector. Two approaches relating to the number of inspected points are presented. The inspected point on the worker’s hand is a single virtual point in the first principle, whereas several virtual points are in the second principle. The first approach deals with the processing time, while the second is aimed at improving the precision. The work presented in this thesis proves that the principle of the flexible protective zone using vision technology is realizable to protect the worker’s hands.
Bản toàn văn lưu tại thư viện Đại học Quốc gia TP. Hồ Chí Minh
Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.
Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
- Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
- Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
- Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.
Hướng dẫn chọn đề tài, cấu trúc và số liệu cho ngành này: Luận văn kỹ thuật, xây dựng, môi trường · Hỏi đáp từng chương với người hướng dẫn số: Học Giả Số · Công cụ số: Luận Văn Số.
Đề tài cùng ngành
- Phân lập và tuyển chọn nấm men Saccharomyces sp. có khả năng sản sinh glutathione trên môi trường nước Thốt nốt có bổ sung Glycine
- Khảo sát tán xạ ngược của gamma trên các vật liệu đồng, nhôm và thép C45 bằng chương trình mô phỏng Geant4
- Xây dựng quy trình loop - mediated isothermal amplification dựa trên gen cpn60 nhằm phát hiện Streptococus suis
- Đánh gíá môi trường nước Đầm Nại
- Tổng hợp và khảo sát hoạt tính quang xúc tác của vật liệu Ag/ZnO
- Lý thuyết sóng spin cho các chất từ
- Nghiên cứu trích ly dịch chiết từ bã cà phê và ứng dụng trong chế biến nước bong bóng cá cà phê
- Tổng hợp vật liệu xúc tác quang-Fenton dị thể CoFe2O4 có từ tính bằng phương pháp sol-gel với sự hỗ trợ của bột gạo
Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.