Design, synthesis, and characterization of polymeric materials for uses in energy storage applications
Luận án · Tiến sĩ · năm 2006 · đề tài tham khảo
| Loại tài liệu | Luận án |
|---|---|
| Bậc học | Tiến sĩ |
| Ngành | Kỹ thuật, xây dựng, môi trường |
| Tác giả | Daniel Thomas Welna |
| Cơ sở đào tạo | Đại học Quốc gia TP. Hồ Chí Minh |
| Năm | 2006 |
| Nguồn | Thư viện số Đại học Quốc gia TP. Hồ Chí Minh · trang gốc |
Tóm tắt
The work described in this thesis focuses on the design, synthesis, and characterization of polymeric materials for energy storage applications, which include small molecule electrolyte additives, solid polymer electrolyte, and gel polymer electrolyte systems. In addition, non-woven nanofiberous mats of a pre-ceramic polymer were examined for high-strength and temperature material applications. Chapter 2 of this thesis describes the synthesis of novel polyphosphazene single ion conductors for use in secondary lithium ion batteries. Chapters 3 and 4 details work towards the synthesis and evaluation of highly selective membranes for use in lithium-seawater batteries. The fifth chapter deals with the synthesis and characterization of a polyphosphazene-silicate solid polymer electrolyte networks for secondary lithium batteries. Chapter 6 describes the fabrications and evaluation a gel polymer electrolyte system which utilizes a phosphate-based small molecule electrolyte additive. The appendix details the electrostatic spinning of a polymeric ceramic precursor to produce a nanofiberous mat, which upon pyrolysis yield boron carbide nanofibers. Chapter 2 describes the synthesis and characterization of novel single ion conductive polymer electrolytes developed by covalently linking an arylsulfonimide sub stituent to the polyphosphazene backbone. An immobilized sulfonimide lithium salt is the source of lithium cations, while a cation-solvating cosubstituent, 2-(2-methoxyethoxy)ethoxy, was used to increase free volume and assist cation transport. The ionic conductivities showed a dependence on the percentage of lithiated sulfonimide substituent present. Increasing amounts of the lithium sulfonimide component increased the charge carrier concentration but decreased the ionic conductivity due to decreased macromolecular motion and possible increased shielding of the nitrogen atoms in the polyphosphazene backbone. The ion conduction process was investigated through model polymers that contained the non-immobilized sulfonimide – systems that had higher conductivities than their single ion counterparts. Chapter 3 details the synthesis of novel polyoctenamers with pendent functionalized-cyclotriphosphazenes as amphiphilic lithium-ion conductive membranes. Cyclotriphosphazene monomers were functionalized with one cycloocteneoxy substituent per ring. Two different types of monomer units, one with oligoethyleneoxy cation-coordination side groups and the other with hydrophobic fluoroalkoxy side groups, were then prepared. The syntheses of these monomers, their ring-opening metathesis copolymerization, and the characteristics of the resultant polymers are discussed, with an emphasis on the dependence of ionic conductivity and hydrophobicity on polymer composition. Chapter 4 focuses the design of novel amphiphilic single-ion conductive polynorbornenes with pendent cyclotriphosphazenes as candidates for lithium-ion conductive membranes for lithium-seawater batteries. The cyclotriphosphazene components were linked to a 5-norbornene-2-methoxy substituent to provide a polymerizable unit. 2-(2-Phenoxyethoxy)ethoxy co-substituents on the cyclotriphosphazene unit of the first co-monomer were utilized to simultaneously facilitate lithium cation transport and introduce hydrophobicity into the polymer electrolyte. 4-(Lithium carboxalato)phenoxy side groups were linked to the rings of a second co-monomer to provide tethered anions with mobile lithium cations and to increase the dimensional stability of the final polymers. The synthesis of norbornenemethoxy-based cyclotriphosphazene monomers, their ring-opening metathesis polymerization, deprotection and lithiation of the 4-(propy1carboxalato)phenoxy side groups, and the characterization of the polymers are discussed to illustrate the dependence of ion transport and hydrophobic properties on the polymer composition. Chapter 5 is an analysis of the ionic conduction characteristics of silicate sol-gel poly[bis(m
Bản toàn văn lưu tại thư viện Đại học Quốc gia TP. Hồ Chí Minh
Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.
Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
- Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
- Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
- Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.
Hướng dẫn chọn đề tài, cấu trúc và số liệu cho ngành này: Luận văn kỹ thuật, xây dựng, môi trường · Hỏi đáp từng chương với người hướng dẫn số: Học Giả Số · Công cụ số: Luận Văn Số.
Đề tài cùng ngành
- Chất lượng các nguồn nước sinh hoạt tại thị xã Sóc Trăng
- Nghiên cứu transistor hiệu ứng trường spin sử dụng phương pháp hàm green không cân bằng
- Xây dựng các thử nghiệm miễn dịch phát hiện protein E7 của Human Papillomavirus type 18
- Nghiên cứu chế tạo vật liệu nano đất hiếm và khảo sát tính chất quang
- Utilization of cassava forages for goat production in An Giang province, Viet Nam
- Tổng hợp, đặc trưng hóa lý, và hoạt tính xúc tác của vật liệu MCM-41 có thành mao quản được zeolite Y hóa
- Phát triển kinh tế hộ nông nghiệp theo hướng bền vững ở tỉnh Bến Tre trong bối cảnh biến đổi khí hậu
- Nghiên cứu ảnh hưởng của phân bò và phân trùn quế đến sinh trưởng, phát triển và năng suất của cây tiêu lốt (Piper longum L.)
Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.