LuanVan.vnLuận Văn
Gửi thư

Design of control system for rubber weighing conveyors used in a 270 liter sealed smelter

Đồ án tốt nghiệp · Đại học · năm 2023 · đề tài tham khảo

Loại tài liệuĐồ án tốt nghiệp
Bậc họcĐại học
Tác giảQuoc Khanh Tang; Ha Van Hoang Nghia; Tran Quang Cuong
Người hướng dẫnVo Tran Anh; Truong Hoang Vu
Cơ sở đào tạoTrường Đại học Bách khoa, Đại học Đà Nẵng
Năm2023
NguồnThư viện số Trường Đại học Bách khoa, Đại học Đà Nẵng · trang gốc

Tóm tắt

The purpose of this study to build an control system for contributing to improving production productivity at Da Nang Rubber Joint stock Company. This is a joint project between the Faculty of Mechanical Engineering - University of Science and Technology - University of Danang and The DRC Company. The presentation presents the processes of researching, designing, and manufacturing the rubber weighing conveyor system. Up to now, our group of students has successfully designed and simulated the system to meet the requirements of the Company. We have upgraded the control and monitoring system of the conveyor system to be as precise and optimal as possible.  Requirements - Maintain the same capacity and performance as the old machine - Based on existing equipment and machinery to improve in the most effective and economical way. - Easy for operators to understand quickly and easily adapt to the new system.  Research objectives - Research object is a rubber weighing system with including 3 successive conveyor belts. - Synchronize the compression system of machine 270-01 with other welding machines of the factory. - Option: Design a control and monitoring system on WinCC.
Bản toàn văn lưu tại thư viện Trường Đại học Bách khoa, Đại học Đà Nẵng

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.