Design of a LiDAR-Based Mobile Robot Using Reinforcement Learning for Navigation in Dynamic Environments
Đồ án tốt nghiệp · Đại học · năm 2026 · đề tài tham khảo
| Loại tài liệu | Đồ án tốt nghiệp |
|---|---|
| Bậc học | Đại học |
| Tác giả | Lê Trần Duy Tân |
| Người hướng dẫn | Nguyễn Thị Kim Trúc |
| Cơ sở đào tạo | Trường Đại học Bách khoa, Đại học Đà Nẵng |
| Năm | 2026 |
| Nguồn | Thư viện số Trường Đại học Bách khoa, Đại học Đà Nẵng · trang gốc |
Tóm tắt
This study presents the design and implementation of a LiDAR-based mobile robot that utilizes reinforcement learning to achieve adaptive navigation in dynamic environments. The proposed system integrates a LiDAR sensor for environmental perception, an embedded computing platform for data processing, and a motor control subsystem for robot locomotion. LiDAR data is used to construct a probabilistic representation of the environment and estimate the robot’s position through scan matching techniques. Based on the generated map and the robot’s state, a reinforcement learning algorithm is employed to learn optimal navigation policies that allow the robot to avoid obstacles and reach target locations efficiently. The system architecture includes modules for sensor data acquisition, localization, map updating, path planning, and motion control. Through continuous interaction with the environment, the reinforcement learning agent improves its navigation strategy, enabling the robot to adapt to changing environmental conditions. Experimental results demonstrate that the proposed approach enhances navigation performance and obstacle avoidance capability in dynamic scenarios.
Bản toàn văn lưu tại thư viện Trường Đại học Bách khoa, Đại học Đà Nẵng
Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.
Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
- Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
- Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
- Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.
Đề tài cùng ngành
- Design and Development of an MPPT Controller for Standalone Photovoltaic Systems under Uniform Irradiance Conditions
- Design and Implementation of an IoT-based Indoor Air Quality Monitoring System for Educational Environments
- Thiết kế hệ thống giám sát áp suất cabin, tốc độ và quãng đường đi được trên ô tô theo tiêu chuẩn Autosar
- Nghiên cứu thiết kế, tích hợp và triển khai hệ thống phát hiện, định vị và phân loại mức độ hư hỏng tấm pin quang điện (PV Panel) sử dụng drone quét nhiệt gắn camera hồng ngoại trong các dự án điện mặt trời
- Design of an IoT-Based System for Monitoring Production Line Machine Performance
- Designing an Edge Computing System for Production Monitoring and Management.
- Development of a virtualized simulation system for the circulation and water filtration system of a water park using WinCC Unified and SIMIT
- Improving Low Voltage Ride-Through Capability of PMSG Wind Turbines.
Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.