LuanVan.vnLuận Văn
Gửi thư

Design and synthesis of organic semiconductors for use in organic field effect transistors

Luận án · Tiến sĩ · năm 2006 · đề tài tham khảo

Loại tài liệuLuận án
Bậc họcTiến sĩ
Tác giảAmanda Ruth Murphy
Cơ sở đào tạoĐại học Quốc gia TP. Hồ Chí Minh
Năm2006
NguồnThư viện số Đại học Quốc gia TP. Hồ Chí Minh · trang gốc

Tóm tắt

In the past ten years, much progress has been made in producing organic semiconductors with properties that rival amorphous silicon. Organic semiconductors are sought for low-cost or large-area electronic devices such as organic field-effect transistors (OFETs), light-emitting diodes (OLEDs), photovoltaic cells, sensors, and radio frequency identification (RFID) tags. Low temperature processing options and the ductility of organic materials also allow flexible plastics or fabrics to be used as substrates. However, the majority of the newly developed materials are insoluble requiring the use of thermal evaporation to obtain thin films. In order for these organic semiconductors to compete as 'low cost' alternatives to silicon, manufacturers must be able to use large-area, continuous, reel-to-reel methods for production, which would likely involve the solution-based deposition methods such as spin coating, stamping, or printing. Therefore, our work has focused on methods for solubilizing and controlling the self-assembly of conjugated oligomers in order to maximize the semiconducting properties from solution-based processes. Chapter 1 gives a general overview of charge transfer in organic semiconductors, and describes how devices are fabricated and tested. An extensive review of the literature on solution processed p- and n-type oligomers is also given. Chapter 2 and 3 discuss our initial attempts to produce soluble oligothiophenes capable of self-assembly. Chapter 2 focuses on 6-functionalized heptathiophene oligomers, while Chapter 3 deals with a-a'-substituted oligothiophene derivatives. The morphology, mechanical, and electrical properties of thermally evaporated, drop-cast and Langmuir-Blodgett (LB) monolayer and multilayer films on silicon dioxide and mica are studied in detail. A synthetic method for incorporating thermally removable solubilizing groups into organic semiconductors is outlined in Chapter 4, and demonstrated using a sexithiophene oligomer. The synthesis, chemical characterization, as well as an in-depth characterization of solution-processed films of this oligomer using AFM and NEXAFS spectroscopy is given. This theme is carried over to Chapter 5, where a series of oligomers functionalized with these solubilizing groups were prepared in order to deduce various structure-property relationships. Organic field-effect transistors (OFETs) made from spun-cast films of these oligomers gave values are comparable with the best thermally evaporated thiophene oligomers reported in the literature, demonstrating the utility of our solubilizing method. In Chapter 6, we report the first OFET devices fabricated from self-assembled monolayers of end-functionalized thiophene oligomers. Oligomers containing organosilane and thiol binding groups were prepared and characterized. Monolayer films were made using solution or Langmuir-Blodgett deposition techniques, and characterized by AFM, ellipsometry and NEXAFS spectroscopy. The performance and stability of these monolayers were investigated in bottom contact field-effect transistors. Finally, Chapter 7 discusses the synthetic strategy we have developed to access both regiorandom and regioregular polythiophenes containing electron-withdrawing carboxylate substituents. Although these polymers have extended conjugation lengths, they provide better oxidative doping stability than conventional polythiophenes due to the lowering of the HOMO energy levels by approximately 0.5 eV. High charge mobilities and on/off ratios are observed in OFETs fabricated entirely in air and remain stable over a period of months demonstrating the low propensity of these materials towards p-doping by molecular oxygen.
Bản toàn văn lưu tại thư viện Đại học Quốc gia TP. Hồ Chí Minh

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.