LuanVan.vnLuận Văn
Gửi thư

Design and Implementation of Real Time Vehicle Monitoring and Tracking System

Đồ án tốt nghiệp · Đại học · năm 2018 · đề tài tham khảo

Loại tài liệuĐồ án tốt nghiệp
Bậc họcĐại học
Tác giảTrần Nam Quân; Nguyễn Đăng Duy; Lê Đình Hoài Lộc
Người hướng dẫnNgô Đình Thanh; Trần Bá Tùng
Cơ sở đào tạoTrường Đại học Bách khoa, Đại học Đà Nẵng
Năm2018
NguồnThư viện số Trường Đại học Bách khoa, Đại học Đà Nẵng · trang gốc

Tóm tắt

The purpose of the thesis is to investigate and implement a system which is used for tracking and positioning of any vehicle by using Global Positioning System (GPS) and Global System for Mobile Communication (GSM). As managing the fleet of vehicles is difficult in these days. High cost fleet maintenance, security risks are the challenges faced by the fleet owners. The owner need to keep track continuously their fleet in order to guarantee that their drivers are in the right way as well as their vehicles are in good status. The vehicle tracking system used to determine the location and status of a vehicle and then send that information to the owner for observing fleet from remote. In order to execute that, the system should include a hardware device installed on the vehicle and a web-based or software application service for monitoring There are many available tracking devices outside on the market, but most of them just served for personal use such as keep track of a personal car. Besides, the time interval of tracking in those devices usually drop in 30s – 1 min. Their product usually include a device attached on vehicle and go along with a mobile application. Our goal aims to design a system for managing a fleet of vehicle such as transportation fleet, bus fleet, taxi fleet in real time (the time interval is less than 5s) and owner can monitor and send alert to each vehicle in the fleet through web-based application. In our thesis, we have developed a vehicle tracking system, which is flexible, customizable and accurate. The obtained system meets all requirements from customer, and all the milestones/features are implemented ahead of schedule. We designed two prototypes in order to have a deep comparison among wireless communication technologies, types of micro-controller, hence from that we can take out practices, experiences then draw best materials for the final prototype
Bản toàn văn lưu tại thư viện Trường Đại học Bách khoa, Đại học Đà Nẵng

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.