Design and fabrication of robot using a gesture-controlled arm
Đồ án tốt nghiệp · Đại học · năm 2023 · đề tài tham khảo
| Loại tài liệu | Đồ án tốt nghiệp |
|---|---|
| Bậc học | Đại học |
| Tác giả | Le Duc Hung; Pham Minh Son |
| Người hướng dẫn | Vo Nhu Thanh; Tran Dinh Son |
| Cơ sở đào tạo | Trường Đại học Bách khoa, Đại học Đà Nẵng |
| Năm | 2023 |
| Nguồn | Thư viện số Trường Đại học Bách khoa, Đại học Đà Nẵng · trang gốc |
Tóm tắt
Designing and manufacturing a gesture-controlled robot using a flex sensor and an angular accelerometer MPU6050 is a research and development project for a robot that the human gesture can control. In this project, the group of students used the flex sensor to recognize gestures by measuring the flexion of the fingers and the angular accelerometer MPU6050 to measure the robot's tilt angle. Then the signals from the sensors are processed by the Arduino microcontroller to control the robot’s motors. To test the robot's operation, the group of students assembled the robot and performed many tests with different gestures. The results show that the robot can control well with gestures such as moving, rotating, raising, and lowering its head. In summary, this project has successfully designed and manufactured a gesture-controlled robot using a flex sensor and MPU6050 angular acceleration sensor. This project can provide users with a simple and convenient means of controlling the robot.
Bản toàn văn lưu tại thư viện Trường Đại học Bách khoa, Đại học Đà Nẵng
Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.
Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
- Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
- Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
- Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.
Đề tài cùng ngành
- Design and fabrication of product sorting and packing system
- Design and manufacture a model of auto part feeding and drilling
- Design and fabrication of product picking and flipping system
- Design and manufacture braille printer
- Design and fabrication of product flipping and arrangement sytem
- Design and manufacture environmental monitoring devices
- Thiết kế và chế tạo hệ thống cân băng tải động.
- Thiết kế, chế tạo hệ thống rót, đóng nắp và xếp chai nước vào thùng
Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.