LuanVan.vnLuận Văn
Gửi thư

Compact nanosecond pulsed power technology with applications to biomedical engineering, biology, and medicine

Luận án · Tiến sĩ · năm 2006 · đề tài tham khảo

Loại tài liệuLuận án
Bậc họcTiến sĩ
Tác giảXianyue Gu
Cơ sở đào tạoĐại học Quốc gia TP. Hồ Chí Minh
Năm2006
NguồnThư viện số Đại học Quốc gia TP. Hồ Chí Minh · trang gốc

Tóm tắt

Pulsed power refers to a technology that is suited to drive applications requiring very large power pulses in short bursts. Its recent emerging applications in biology demand compact systems with high voltage electric pulses in nanosecond time range. The required performance of a pulsed power system is enabled by the combined efforts in its design at three levels: efficient and robust devices at the component level, novel circuits and architecture at the system level, and effective interface techniques to deliver fast pulses at the application level. At the component level we are concerned with the power capability of switches and the energy storage density of capacitors. We compare semiconductor materials - Si, GaAs, GaN and SiC - for high voltage, high current, fast FET-type switches, and study the effects of their intrinsic defects on electrical characteristics. We present the fabrication of BST film capacitors on silicon substrates by pulsed laser deposition, and investigate their potential application to high voltage, high energy density capacitors. At the system level, a nanosecond pulse generator is developed for electroperturbation of biological cells. We model and design a Blumlein PFN (Pulse Forming Network) to deliver nanosecond pulses to a cuvette load. The resonant circuit employs four parallel 100 A MOSFET switches and charges the PFN to 8 kV within 350 ns. At the application level, in order to controllably deliver nanosecond electric pulses into tumors, we have designed, fabricated, and tested impulse catheter devices. Frequency responds, breakdown voltages and effective volumes of catheters are evaluated. With comparison of simulation and experimental results, we further develop dielectric dispersion models for RPMI. This thesis presents a set of strongly interdisciplinary studies based on pulsed power technology and towards biomedical applications. Addressed issues include from fundamental materials studies to application engineering designs that are essential to next generation compact pulsed power technology. The combined research efforts on these issues enable the further development of pulsed power for biomedical, biophysical, and medicine applications.
Bản toàn văn lưu tại thư viện Đại học Quốc gia TP. Hồ Chí Minh

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.