LuanVan.vnLuận Văn
Gửi thư

Catalytic hydroformylation of alkenes and polyalkenes: Novel approaches to catalyst synthesis, characterization and recycling

Luận án · Tiến sĩ · năm 2006 · đề tài tham khảo

Loại tài liệuLuận án
Bậc họcTiến sĩ
Tác giảJimoh Tijani
Cơ sở đào tạoĐại học Quốc gia TP. Hồ Chí Minh
Năm2006
NguồnThư viện số Đại học Quốc gia TP. Hồ Chí Minh · trang gốc

Tóm tắt

Hydroformylation of olefins is a versatile method and well-established industrial process for the production of aldehydes using transition metal complexes as homogeneous catalysts. Currently, worldwide production of aldehydes exceeded seven million tons/year. Rhodium (I) complexes are the most active and selective catalysts for hydroformylation reaction. For any industrial application of homogeneously catalyzed reaction, a complete recycling of the generally expensive catalyst should be guaranteed. A thermomorphic system is characterized by solvent pairs that reversibly changes from biphasic to monophasic and vice versa as a function of temperature. We have applied the thermomorphic approach to rhodium-catalyzed hydroformylation of higher olefins (C>6). The effect of CO/H2 pressure, ligand/catalyst ratio on activity, selectivity and recycling were studied on 1-octene and other olefins. The impregnation of HRhCO(PPh3)3 on mesoporous materials such as MCM-41, through Phosphotungstic acid (PTA) gives a novel hydroformylation catalyst, which was characterized by XRD, IR, and 31P CP MAS NMR. The activity, selectivity and recycling of this supported catalyst were established by hydroformylation of 1-octene. The catalyst activity was shown by the recycling capability for several times without significant loss of activity. Results are presented on a novel application of catalysis to chemical modification of commercially available polybutadiene polymers. The functionalized polyaldehyde products are key intermediates in the development of various polymer derivatives which form the basis for various novel material and component applications, such as manufacture of automobile body components by reaction injection molding processing. Characterization of the reaction products using 13C and 1H NMR shows that the olefin units in the polybutadiene are selectively hydroformylated to the 1,2-terminal branched and 1,4-internal branched aldehydes products.
Bản toàn văn lưu tại thư viện Đại học Quốc gia TP. Hồ Chí Minh

Thông tin và tóm tắt ở trên lấy từ kho số mở của thư viện trường. Bản toàn văn do thư viện trường quản lý — có nơi cho đọc trực tuyến, có nơi cần tài khoản bạn đọc của trường.

Mở tại thư viện trường ↗
Dùng tài liệu tham khảo cho đúng
  • Đọc để hiểu cách người trước đặt câu hỏi, chọn phương pháp, trình bày số liệu — rồi tự làm với dữ liệu và bối cảnh của bạn.
  • Ý, số liệu, bảng biểu lấy từ tài liệu này phải trích dẫn (tác giả, năm, tên đề tài, cơ sở đào tạo).
  • Đề tài trùng tên vẫn làm được nếu khác đơn vị khảo sát, thời gian hoặc cách tiếp cận — nêu rõ điểm khác trong phần mở đầu.

Đề tài cùng ngành

Tác giả muốn gỡ, sửa thông tin hoặc bổ sung bản toàn văn: gửi yêu cầu qua trang Liên hệ, kèm đường dẫn trang này.